Call us at: +1 859 918 5686
METER MIX® Systems US Inc.
METER MIX® Systems US Inc.
1445 Jamike Dr. Suite 100
Erlanger
KY 41018
USA

Epoxy Dispensing Machines

PAR 20G & PAR 200G

Epoxy Dispensing Machines

The METER MIX® PAR 20G and 200G metering, mixing and dispensing machine was specially developed for component bonding and sealing applications. These dispensing machines process epoxy as well as other materials, e.g. polyurethane, silicone or polysulphide. One of their main characteristics is the wide range of high-viscosity material systems that can be very reliably metered. Precise doses or accurate beads can be metered with excellent repeatability. The twin follower seal plates process the materials directly from the original supplier’s containers providing a clean, mess-free operation with little exposure to the materials. Both of these machines also feature independent electric inverter drive motor control in order to provide precise control over mixing ratio, flow rate and shot size with the added benefit of a continuous flow rate. Interface with automated systems for fully or semi-automatic applications is also possible.

Typical Applications

    • Component Bonding & Sealing

    Typical Materials

      • Polyurethane
      • Epoxy
      • Silicone
      • Methacrylate
      • Polysulphide

      Technical Data

        PAR 20G & PAR 200G
      Ratio Range Capability 1:1 to 100:1
      (depending upon pumps selected)
      Viscosity acceptance Up to 1,000,000 mPa.s
      Shot size Available from approx. 2ml upwards
      Flow Rate Up to approx. 500ml/minute
      (depending upon viscosity)
      Mixing Disposable Static
      Drum/Pail sizes PAR 20G: 20lt (5,27 gal)
      Drum/Pail sizes PAR 200G: 200/20lt (52,63/5,27 gal)
      PAR 200G-200: 200/200lt (52,63/5,27 gal)

      Standard Features

      • Floor mounted machine (PAR 200G) on castors for portability (PAR 20G)
      • Metering Pumps: Electric inverter driven gear pumps (mounted to follower plates)
      • Mixer Valve: Pneumatically operated TSV601 Mixer Valve
      • “Metered” or “Operator Controlled” shot size selection
      • Service indicator lamp
      • Controls:
        • Integrated PLC control with colour HMI touchscreen operator interface
        • Flow rate adjustable via rotary potentiometer
        • Air supply filter/regulator and gauge with connection check unit
        • Main Off/On switch
        • Emergency Stop & Reset Buttons
        • Anti-gel automatic purge timer
        • Either foot pedal, hand held trigger or remote start options available
        • 230v AC electric supply + compressed air @ 80 p.s.i.

      Available Options

        • Digitally controlled heating to follower plates, pumps and hoses
        • Electronic low-level sensing to both materials with visual and audible alarms
        • Stainless steel wetted parts to protect against corrosion
        • Hardened parts to protect against abrasion
        • Swiveling boom assembly to support hand held mixer valve
        • Rotary/Static disposable mixing option (electrically driven)

        Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information

        Close