Resin Dispensing with METER MIX® Machines
PAR 5C
The PAR 5C metering and mixing machine offers an economic solution for a wide range of resin dispensing applications. Very reliable and precise electronic potting, casting, moulding or component bonding can be easily achieved. This machine exhibits a high degree of efficiency, accompanied by a compact floor mounted design. Twin 30lt (7.9 US gal) gravity feed reservoirs securely contain the A and B material components. The PAR 5C can handle two part materials such as epoxy, polyurethane or silicone in a very stable and careful process. The new METER MIX® in-line drive mechanism (ILD) provides characteristics which are not normally associated with pneumatic machine technology: advanced flow rate and ratio control characteristics. High mixing ratios or large differences in viscosities are also possible with this machine.
Typical Applications
- Electronic Potting
- Casting
- Moulding
- Component Bonding
- Brush Setting
Typical Materials
- Polyurethane
- Epoxy
- Silicone
- Methacrylate
Technical Data
| PAR 5C | |
|---|---|
| Ratio Range Capability | 1:1 to 20:1 (depending upon pumps selected) |
| Viscosity acceptance | Up to 500,000 mPa.s (depending upon material thixotropy) |
| Shot size | Available from approx. 25ml up to 235ml at volumetric ratios of 1:1 & 3:1 respectively 5ml up to 63ml at a ratio of 1:1 by volume |
| Cycle Rate | Up to 30 shots per minute (depending upon viscosity) |
| Mixing | Disposable Static |
| Reservoir Capacity | 30lt (7,9 gal) stainless steel with silica gel moisture protection |
Standard Features
- Floor mounted machine with castors for portability
- Metering Pumps: Single acting positive displacement
- Mixer Valve: Pneumatically operated TSV601 Mixer Valve
- “Metered Shot” and “Operator Controlled” shot size selection
- Shot size adjuster with digital reference indicator
- Service indicator lamp
- Controls:
- Integrated PLC control with HMI operator interface
- Dispense pressure regulator and gauge
- Air supply filter/regulator and gauge with connection check unit
- Main Off/On switch
- Emergency Stop & Reset Buttons
- Anti-gel automatic purge timer
- Shot counter/repeater unit for multiple shot applications
- Either foot pedal or hand held trigger start options available
- 230V/50Hz or 110V/60Hz AC electric supply + compressed air @ 80 p.s.i.
Available Options
- 6lt (1,58 gal), 12lt (3,16 gal), and 18lt (4,74 gal) capacity reservoir sizes
- Digitally controlled heating to reservoirs, pumps and hoses
- Electric agitation to material reservoirs
- Electronic low-level sensing to material reservoirs with visual and audible alarms
- Stainless steel wetted parts to protect against corrosion
- Hardened parts to protect against abrasion
- Nitrogen purge facility to material reservoirs
- Vacuum degassing to material reservoirs
- Rotary/Static disposable mixing option (electrically driven)
- Bulk feed transfer pump facility directly from suppliers containers
